Battery problems are one of the commonest among car-related issues. Of course, any issue with your car is equally serious, especially if you are in the middle of the road, and there is no servicing shop close by. In such situations roadside assistance services are godsends. Purchase car batteries Sydney from Roadside Response and see how they work. However, battery issues seem to be more troublesome, especially if you don’t have any knowledge of batteries and your roadside assistance company doesn’t provide any battery service. Therefore, while you opt for such a service, you should check whether they provide battery service too. Let’s learn some battery basics so that you won’t have to fumble upon facing a problem.
The lead acid battery is formed of lead, plates and lead oxide (many other elements are made use of to change hardness, density, porosity, etc) along with a solvent called electrolyte made of 35% sulfuric acid and 65% water and causing a chemical reaction that generates electrons. The proportion of sulfuric acid in the solution of a battery can be measured using a hydrometer. If this proportion is low, it indicates that the chemistry that generates electrons is absent. Where does the sulfur go? It accumulates on the battery plates and returns to the electrolyte when you recharge the battery.
Think of Safety First
Since batteries are designed to create electricity, you should be careful while handling them.
- Remove jewelry if you are wearing any.
- Remember that hydrogen gas produced when batteries are charged is extremely explosive.
- You might have seen incidents in which batteries explode and everything around is drenched in sulfuric acid. Wearing safety goggles is therefore essential.
- Ironically, polyester is safe to wear because sulfuric acid doesn’t affect it, while cotton is unsafe because it is eaten up by the acid.
- While working on your vehicle’s electrical parts, it is best to detach the ground cable.
- Remember that you are dealing with explosive gases, a corrosive acid and hundreds of amps of electrical charge!
Types of Batteries
There are two types among lead acid batteries (each divided into 3 sub-categories):
- Cranking or Starting
- Marine/Golf Cart or Deep Cycle
The starting battery is meant to deliver quick bursts of energy and so, has more number of plates which are thinner. The deep cycle battery gives out less instant energy, but it’s long term. These batteries have thicker plates and can withstand many discharge cycles. For deep cycle applications, you should not use starting batteries as their thinner plates are more likely to warp and pit when discharged.
How to Choose a New Battery?
It’s recommended to buy a battery with the highest amp hour or reserve capacity possible. Of course, you have to consider some other points too like cable hook up, physical size and terminal type. If you live in a harsh environment or won’t put your battery into frequent maintenance and charging, it’s better to choose an AGM (Absorbed Glass Mat) or a Gel Cell instead of a Wet Cell.
- Make sure that you purchase the right type of battery for the application.
- Remember that starting and deep cycle batteries are different.
- Keeping the battery fresh is also important. The longer the battery remains inactive and isn’t recharged, the more sulfation is built up on plates and causes damage. Therefore, while buying, check the date.
All the jobs regarding roadside assistance and car batteries Melbourne from Roadside Response are not easy to be done on your own and you should have contact details of a good professional company.